Battery labels often give amp-hours (Ah) and volts, while your electricity bill and home battery specs use kilowatt-hours (kWh). Use the first calculator to convert between them. Use the second to estimate how long a battery will run a device or a home circuit.
1. Convert Ah to kWh
The sum is amps × volts ÷ 1,000. To go the other way, divide kWh × 1,000 by the voltage.
2. How long will the battery run my load?
This is a rough estimate. Real runtime also depends on temperature, battery age, how fast it is being drained and the battery management system.
Sizing a battery for your home?
Capacity in kWh is only part of it. What matters for a household is how much evening use and spare solar you have to move. Our battery calculator compares Wrenstead Store 1 (1.024kWh) and Store 2 (2.048kWh) using your own figures.
Questions people ask
How do I convert Ah to kWh?
Multiply the amp-hours by the voltage, then divide by 1,000. A 100Ah battery at 12.8V holds 1,280 watt-hours, which is 1.28 kWh.
Why is the usable energy lower than the label?
You cannot normally drain a battery to zero without shortening its life, and some energy is lost as heat in the inverter and wiring. The two percentage boxes above take that into account.
Does a bigger Ah rating always mean more energy?
Not on its own. A 100Ah battery at 48V holds four times the energy of a 100Ah battery at 12V. Always compare in kWh.
Can I use this for a home battery in a power cut?
It gives you a runtime estimate, but most grid-connected solar batteries switch off when the grid fails unless they have dedicated backup hardware. Read our guide to solar and batteries in a power cut first.
Important: This calculator gives an illustrative estimate only. It is not electrical advice, and it does not replace the manufacturer's specification for your battery.